JUARISTI TS.3 boring machine
JUARISTI TS.3 boring machine.
Ask us for more information.
Additional information
| Boring spindle diameter | 130 mm |
|---|---|
| Toolholder | – ISO 50 DIN 2080 |
| Maximum boring spindle rotation speed | 2.300-3.000 MIN-1 |
| Main spindle motor power | 22-37 kW |
| Number of spindle ranges, in the hydraulic gearbox | 2 |
| Vertical travel Y | 1.200-2.000 mm |
| Axial travel of boring spindle Z | 600 mm |
| Longitudinal travel of column W | 1.100-1.500 mm |
| MG-12 | – Maximum table load: 12,000 kg |
| Table surface | – 1.450 x 1.450 mm |
| MAIN SPINDLE (MAIN MOTOR: SIEMENS) | . |
| Diameter | 30 mm |
| Internal taper | ISO DIN 69871/1-B |
| Nose of cushioned shaft | ISO 60 (DIAM. 221,4) |
| Speed ranges | 2 |
| Low range | 5 – 871 rpm |
| High range | 871 – 3.000 rpm |
| Constant torque revolutions | 5 – 215 rpm |
| Revolutions at constant power | 215 – 3.000 rpm |
| Maximum power | 37 kW |
| Maximum torque | 1646 Nm |
| MACHINE TRAVEL | . |
| Longitudinal in the column on the longitudinal bed (W) | 1425 mm |
| Vertical of the spindle on the column (Y) | 2000 mm |
| Axial of the boring spindle (Z) | 800 mm |
| Cross of the table on the cross bed | 4000 mm |
| ROTATING TABLE | . |
| Dimensions | 1600 x 2000 mm |
| Maximum load centered on the table | 9.000 kg |
| CONTROLLED AXES | . |
| Crossing of the table over the transverse bed | X |
| Vertical of the spindle on the column | Y |
| Axial of the boring spindle | Z |
| Longitudinal of the column | W |
| Table rotation | B |
| Main spindle rotation | S |
| MAIN SPINDLE AND FEED DRIVE MOTORS SIEMENS | . |
| X displacement motor | 50 Nm (3000 min⁻¹) |
| Y displacement motor | 41.5 Nm (con freno) (2000 min⁻¹) |
| Displacement motor Z | 41.5 Nm (2000 min⁻¹) |
| Travel motor W | 41.5 Nm (2.000 min⁻¹) |
| Rotation motor B | 41.5 Nm (2.000 min⁻¹) |
| Main shaft (S) | 37 kW (0 – 1.500 – 6.500 min⁻¹) |
| ACCESSORIES | – Automatic tool changer: 60 tools. |
| ELECTRICAL SPECIFICATIONS | . |
| Voltage | 400 V |
| Frequency | 50 Hz |
