DANOBAT TM750 lathe
The DANOBAT TM750 lathe is designed for thick, interrupted cuts, high long-term accuracy and high-quality surface finishes. (Sold)
Additional information
| Control | FANUC 310 i |
|---|---|
| Maximum permissible diameter on longitudinal guides | 750 mm |
| Maximum permissible diameter on transverse guides | 630 mm |
| Maximum permissible diameter with upper turret | 630 mm |
| Maximum permissible diameter with lower turret | 400 mm |
| Travel on z axis | 1270 mm |
| Travel on x axis | 630 mm |
| Positioning accuracy X | ± 0,005 |
| Positioning accuracy Z | ± 0,010 |
| Maximum distance between main axle nose to second axle nose | 1600 mm |
| Main shaft nose type | 11'' |
| Maximum speed of the main shaft | 4200 rpm |
| SHW autoblock head plate diameter | ø 400 mm |
| Milling spindle speed | 8000 rpm |
| Number of power tools | 12 |
| Second shaft bore diameter | 91 mm |
| Sub-spindle chuck diameter | ø 315 mm |
| Main spindle power | 25 kW |
| Diameter of the plate | 315 mm |
| Sub-spindle power | 18/23 kW |
| Motor torque | 100/128 Nm |
| Type of motor | TORQUE |
| Number of tools | 40 |
| Taper type | BT 40 |
